Sharp LD-26SH3U Operation Manual page 49

Adjustment pattern
If you are using Windows, use the adjustment
pattern on the supplied CD-ROM.
1. Load the supplied CD-ROM into the CD-ROM
drive of the computer.
2. Open [My Computer] and select CD-ROM.
3. Double click on [Adj_uty.exe] to run the
adjustment program.
The adjustment pattern will appear.
Adjustment pattern
4. After completing the adjustments, press the
computer's [Esc] key to exit the adjustment
program.
Note:
- If your computer's display mode is set to 65K
colors, you may see the different color levels in
each color pattern or the gray scale may look
colored. (This is due to the specification of the
input signal and is not a malfunction.)
Using the menus in PC mode
E48