Connecting The Tv To A Power Source - Sharp LD-26SH3U Operation Manual

Connecting the TV to a power source

CAUTION!
- When connecting, ensure that the TV is switched off.
- Use only the power cord supplied with the TV.
- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
See page E10 for information on removing/replacing the terminal cover.
1. Connect the power cord (supplied) to the power input terminal.
2. Place the power plug into an AC outlet.
1 AC outlet
Power input terminal
2
Power cord (supplied)
Note:
- If the TV does not operate, disconnect the power cord from the AC outlet and reconnect it again. The
setup must be completed in the proper order for the TV to function.
E19