Checking Your Tv's Current Settings (Display); Switching Power Off After A Specified Length Of Time (Sleep) - Sharp LD-26SH3U Operation Manual

Checking your TV's current settings
(DISPLAY)
The information displayed will vary depending on
the current display mode and other settings.
POWER
DISPLAY
FLASH
BACK
1. Press the DISPLAY button.
[TV mode]
Display mode, TV channel number, MTS mode,
antenna type, CC setting, and V-Chip rating
information will be displayed.
[AV mode]
Display mode, AV input terminal type, input
signal resolution, CC setting, and V-Chip rating
information will be displayed.
[PC mode]
Display mode, screen resolution, and horizontal/
vertical frequency will be displayed.
The information will disappear after several
seconds.
Note:
- If the TV broadcast changes while the
information is displaying, the broadcast and
MTS mode may not match.
Other features
Switching power off after a specified
length of time (SLEEP)
The TV can automatically switch off (standby) after
a specified length of time. This is helpful if you
want to use the TV at bedtime.
INPUT
1. Press the SLEEP button.
2. Specify in how many minutes you want the TV to
When the specified time elapses, the TV
automatically switches off and clears the SLEEP
timer.
Checking the time remaining on the SLEEP timer
1. Press the SLEEP button.
TV Air
Audio : SAP(ST)
CC : Off
Changing the specified time
Ratings : R
1. Press the SLEEP button.
2. Change the specified time by pressing the
Notes:
- When there are only 5 minutes remaining on the
- Pressing the POWER button while the SLEEP
- In PC mode, switching to the power-saving
E57
RETURN EXIT
VIEW MODE PICT MODE
SLEEP
ON/OFF SIZE/MOVE
PIP/SPLIT
switch off by pressing the SLEEP button.
The time changes in the following order each
time you press the button:
Off → 30 min → 60 min → 90 min → 120 min →
150 min → Off
The time remaining on the SLEEP timer will be
displayed for several seconds.
The remaining time will be displayed.
SLEEP button several times as needed.
SLEEP timer, the remaining time will be
displayed every minute.
timer is operating will clear the timer.
mode (with the POWER LED in orange)
automatically clears the SLEEP timer.
MTS MUTE
CC FREEZE
SWAP SELECT