LG LX31 Series Instruction Manual page 14

14
INSTALLATION MENU
- Programme Change
Decide to change channel or not by setting 'Program Change' as 'Yes'(Change Possible) or
'No'(Change Impossible) when present source is TV.
y When 'Programme Change' is set to No (Change Impossible)
y
» Program Key, Numeral Key, List Key, Q.View Key don't work and entering 'Channel Menu'
in the Main Menu OSD is impossible.
» 'Programme' item in 'On Time' menu will be fixed.
» Entering 'Setup Menu' in the 'Main Menu' OSD is impossible regardless of 'Setup Menu'
item.
y When 'Program Change' is set to Yes(Change Possible), 'Program Key', 'Numeric Key', 'List
y
Key', 'Q.View' Key does work and entering 'Channel Menu' in the Main Menu OSD is possible.
- Menu Display
Function to decide whether work with menu (including relevant menus too) of control key (Yes –
Enter possible) or not (No – Enter Impossible).
y Although select No(Enter impossible), the action that press a Menu button for 5 seconds to
y
enter 'Installation Menu' is available.
y When select Yes(Enter possible), Menu works.
y
- OSD Display
Decide to display OSD or not by setting 'OSD Display' as Yes(Display) or No(Do not Display).
y When 'OSD Display' is set to 'No'(Do not Display), all OSD is not displayed except some
y
exception.
y Although select 'No' (Do not Display), the action that press a Menu button for 5 seconds
y
to enter 'Installation Menu' and entering service menu are available. (In-Start, Power-Only,
Adjust, Installation Menu ...)
- System Provider Mode
- 'System Provider Mode' allows access to the menu system from the front panel or remote control
but access is controlled as follows:
y When value is 'Yes', Accessible Items on the menu system, others are not permissible.
y
» Input select screens
» Sleep timer
» Aspect Ratio
» Closed Caption
» 'Lock' / 'My Media' / 'Network' / 'Support' / 'Bluetooth' Menu
y 'Q.menu', which is related to 'Setup' Menu, is not accessible.
y
y If the channel map is empty, 'Auto-tuning' guide dialog should be blocked by pressing 'List',
y
'Fav', 'CH+', 'CH-' keys.
6 Power Management
The Power Management feature will turn off the television receiver if no input control command is
received from either the Local or IR Key within a selected hours.
y Activity on either of these inputs shall restart the 'Power Management' timer and check key
y
time interval again.
y This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y
y Default value is 'Off(disabled)'.
y
y TV should off and on after apply this setting.
y
7 DTV Programme Update
- It is a mode to set whether to update DTV channel information automatically or not.
y When DTV Channel Update is set to 'Auto', the function to update TV's programme map
y
according to DTV channel's stream information
y DTV Channel Update is set to 'Manual', the function to keep TV's channel map even though
y
DTV programme's information is changed.