Installing The Wireless Card - Dell Alienware Aurora R16 Owner's Manual

Steps
1. Lay the computer on the right side.
2. Remove the screw (M2x3) that secures the wireless card to the system board.
3. Lift the wireless-card bracket off the wireless card.
4. Disconnect the SMA cables from the wireless card.
5. Slide and remove the wireless card from the wireless-card slot.

Installing the wireless card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
CAUTION: To avoid damage to the wireless card, do not place any cables under it.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.
61