Identifying The Storage Device In Device Manager; Identifying The Storage Device In System Setup (Bios); Coin-Cell Battery; Removing The Coin-Cell Battery - Dell Alienware Aurora R16 Owner's Manual

b. If you are replacing a storage device which does not have the operating system installed, follow the steps in
storage device in system setup
NOTE: To install the operating system on to your storage device, see Reinstall Windows to the Dell factory image using
recovery media in the Knowledge Base Resource at www.dell.com/support.

Identifying the storage device in Device Manager

Steps
1. On the taskbar, click the search box, and then type Device Manager.
2. Click Device Manager.
The Device Manager window is displayed.
3. Expand Disk drives.

Identifying the storage device in system setup (BIOS)

Steps
1. Turn on or restart your computer.
2. Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
A list of hard drives are displayed under the System Information in the General group.

Coin-cell battery

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
WARNING: Before working inside your computer, read the safety information that is shipped with your computer. For
more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that
you note the BIOS setup program's settings before removing the coin-cell battery.
2. Remove the left-side cover.
About this task
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
(BIOS).
Before working inside your computer.
Identifying your
49