2
Click the "File" menu, and select "Open".
3
Select the folder where the image files (Presentation
Slides) are saved, and click "OK".
| The images in the selected folder are previewed in the
"Presentation Transfer" window.
If the size of the image is smaller than the panel resolution on the
projector, the image will be displayed with black areas. However,
the software will transfer the image in the original resolution.
4
Select "Image Transfer" in "Transfer Mode".
For details on the "Custom Image Transfer", see
5
On the projector side, the screen is automatically set to
the CUSTOM mode.
To restore the previous screen, press the INPUT select button
(INPUT1~5).
G For NV5/6/7 users:
The projector must be in IrCOM mode to receive the images.
Press the "IrCOM" button on the projector or the remote control.
G For the "Self Run" transfer, skip over to section "To send all the
images ("Self Run")" on
page
85.
83
Single
pages
90, 91.