Setup For Controlling The Projectors; Setup Flowchart - Sharp XG-P25X Operation Manual

Setup for Controlling the Projectors

The settings for the projectors must first be made in the software before attempting to control
any projector. Settings are made in
The settings for the
using the ID numbers.

Setup flowchart

Setting the number of
projectors to be controlled
Setting whether to control
a single projector or multiple
projectors (page
To control multiple projectors
Setting whether
or not to use IDs
Setting whether or not to use
IDs to control projectors
To use IDs
Create the "All Projector List"
Create the "All Projector List"
(list of projectors to be controlled).
Create the "All Projector List"
automatically.
Scan Setting
From the following pages onwards,
Single: Functions used when the projector is used in "Single Projector Operation Mode."
Multi: Functions used when the projectors are used in "Multiple Projector Operation Mode."
"Scan
ID numbers on the projector are needed to control the projector by
25)
(page 25)
(page 26)
Single
Setting" or in "Projector
To control a single projector
To not use IDs
Create the "All Projector List"
Create the "All Projector List"
(list of projectors to be controlled).
Create/add to the
"All Projector List" manually.
Projector Setting
and/or Multi are displayed at the top of the page.
24
Setting".
(page 28)