Connections - Telefunken TNT UHDR10 AC4B User Manual

Connections

Front View
TNT UHDR10 AC4B
1. IR Receiver
2. Standby LED
Back View
1. Antenna In: To connect the box to an antenna system by using a proper RF cable
2. Digital Audio Out: To transfer the digital audio to a receiver via an optical audio cable
3. Analogue A/V Output: To connect the box to your TV's analogue A/V input (if available) by using an
A/V cable
4. HDMI Output: To connect the box to your TV's HDMI input (if available) by using HDMI connection cable
5. Power Input: To provide power to the box (DC IN, 12V)
Side View
1. USB Input: To connect USB storage devices for media playback and recording functions
Make sure that you connect all cables and connections before you plug the box's adaptor into the main supply.
After you connect the box to the main supply, the LED light located on the front panel will illuminate in red and
then stay in green (Power on mode).
English - 4 -