Table of Contents
Advertisement
is being broadcasted at the moment, recording will
start immediately.
To cancel an already set record timer, highlight that
event and press the OK button and select the option
Delete Rec. Timer. The record timer will be cancelled.
IMPORTANT: Connect a USB disk to your box while the box
is switched off. You should then switch on the box to enable
the recording feature.
Notes: It is not possible to set timer or record timer for two or
more individual events at the same time interval.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your box. Connect it to the USB input
located on the side of the box.
After connecting a USB storage device to your box
the Media Browser menu will be displayed on the
screen. You can access the content of the connected
USB device any time later from this menu. Select the
connected USB input option and press OK. Then
select the file of your choice and press OK to display
or play it back.
You can set your Media Browser preferences by
using the Settings menu. The Settings menu can be
accessed via the information bar which is displayed at
the bottom of the screen while playing back a video or
sound file or displaying a picture file. Press the Info
button if the information bar is not being displayed at
the time, highlight the gear wheel symbol positioned
on the right side of the information bar and press OK.
Picture Settings, Sound Settings, Media Browser
Settings and Options menus will be available.
Available menus and the content of these menus
may change according to the type of the currently
open media file.
Loop/Shuffle Mode Operation
Start playback and activate
Start playback and activate
Start playback and activate
Start playback and activate
To use the functions on the information bar highlight
the symbol of the function and press OK. To change
the status of a function highlight the symbol of the
function and press OK as much as needed. If the
symbol is marked with a red cross, that means it is
deactivated.
All files in the list will be
continuously played in
original order
The same file will be
played continuously
(repeat)
All files in the list will be
played once in random
order
All files in the list will be
continuously played in
,
the same random order
English - 13 -
USB Recording
Programme Recording
When using a new USB hard disk drive, it is rec-
ommended that you first format the disk using the
Format Disk option in the Device>Recordings>
Settings menu.
IMPORTANT !
Note that ALL the data stored on the USB disk will
be lost and then the disk format will be converted to
FAT32 in such a case.
To record a programme, you should first connect a
USB disk to your box while it is switched off. You
should then switch on the box to enable the recording
feature.
To use recording your USB drive should have 2 GB
free space and be USB 2.0 compatible. If the USB
drive is not compatible an error message will be
displayed.
To record long duration programmes such as movies,
it is recommended to use USB Hard disk drives
(HDD's).
Recorded programmes are saved onto the connected
USB disk in the following directory: /DVR/RECS. A file
in TS (.ts) format is created for each recording. This file
includes information such as broadcaster, programme,
and recording time. If desired, you can store/copy
recordings onto a computer; however, these files will
not be available to be played on a computer. You can
play the recordings only via your box.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufficient, the recording may fail and the timeshifting
feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
The hard disk drives that have a storage capacity of
more than 2 terabytes are not supported.
Do not pull out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Multipartition support is available. A maximum of two
different partitions are supported. The first partition
of the USB disk is used for USB Recordi̇ ng ready
features. It also must be formatted as the primary
partition to be used for the USB Recordi̇ ng ready
features.
Some stream packets may not be recorded because
of signal problems, as a result sometimes videos may
freeze during playback.
While recording a programme in the background you
can use menu options or use the Media Browser
functions, such as viewing pictures, playing video and
music files, and even play back the ongoing recording.
Advertisement
Table of Contents
