Table of Contents
Advertisement
Settings Menu Content
Devices Menu Content
Timer of No Signal
CEC
CEC Auto Power On
Picture Menu Content
TV Type
HDMI Resolution
HDR10
Colour Depth
Sound Menu Content
Volume
Audio Delay
Digital Audio Output
Installation Menu Content
Automatic Channel
Scan (Retune)
Manual Channel
Scan
Installation Settings
(optional)
Clear Service List
Select Active
Network
Signal Information
First time installation
If your box does not receive any signal from the antenna input for 3 minutes, it will go
into standby mode. You can enable or disable this functionality by setting this option
accordingly.
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the box.
Press Left or Right button to enable or disable the feature.
Select the aspect ratio of the screen. 16:9 and 4:3 options may be available.
Select your resolution preference for HDMI output. Auto, 576i/p, 720p, 1080i/p, 4Kp24,
4Kp25, 4Kp30, 4Kp50, and 4Kp60 options are available.
Turn the HDR10 function on or off. By means of this function, your box can reproduce a
greater dynamic range of luminosity by capturing and then combining several different
exposures.
Displays the setting for colour depth.
Adjusts the volume level.
Set the delay value for audio by using the Left and Right directional buttons.
Select your audio format preference for the digital audio out socket on the box. Auto,
PCM, and Passthrough options are available.
Displays automatic tuning options. Digital: Searches and stores digital aerial
channels.
This feature can be used for direct broadcast entry.
Displays installation settings menu. Standby Mode Search (*): Your box will search
for new or missing channels while in standby mode. Any new found broadcasts will be
shown. Dynamic Channel Update (*): If this option is set to Enabled, the changes on
the broadcasts such as frequency, channel name, subtitle language etc., will be applied
automatically while watching.
(*) Availability depends on model.
Use this setting to clear channels stored. This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or Finland.
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related information such as signal level/
quality, network name, etc. for available frequencies.
Deletes all stored channels and settings, resets the set-top box to factory settings.
English - 10 -
Advertisement
Table of Contents
