Table of Contents
Advertisement
SET-UP
1
Remove all pieces of tape, then open the platen
cover and remove the protective material.
2
Use a coin (or other suitable object) to remove the
screw.
Store the screw in the paper tray as described in
step 6 because it must be used if the copier has
to be moved. (p. 42)
3
Install the TD cartridge.
For installation of the TD cartridge, see steps 1 and 2 and steps 4
to 7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.
Gently lift and pull out the paper tray until it stops.
4
5
Remove the pressure plate lock. Rotate the
pressure plate lock in the direction of the arrow to
remove it while pressing down the pressure plate of
the paper tray.
11
Advertisement
Table of Contents
