Table of Contents
Advertisement
XY ZOOM
24
5
Use the PRESET RATIO selector (
zoom (
,
) keys to change the copy ratio in the
horizontal direction in a similar manner as for the vertical
direction.
6
Press the copy ratio display (
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately
displayed.
Ensure that copy paper of the desired size is installed in
7
the paper tray.
If the bypass tray was previously selected, the tray will be automatically
selected if the original size and copy ratio are matched to the paper in
the cassette.
8
Set the number of copies and press the START (
To change the copy ratios again, press a PRESET
RATIO selector (
) key. Then, perform step 3 and the succeeding
steps.
To cancel this function, press the XY-ZOOM (
again.
,
) keys and
) key.
) key.
,
) key or a zoom (
) key
,
Advertisement
Table of Contents
