Table of Contents
Advertisement
AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying needs.
28
1
Press the AUTO/MANUAL/PHOTO (
to select the PHOTO (
2
Press and hold down the AUTO/MANUAL/PHOTO (
/
) key for approximately 5 seconds.
The PHOTO (
) indicator will go out and the AUTO indicator will
begin to blink.
One or two exposure indicators corresponding to the current automatic
exposure level will light up. The factory default setting is level "3".
3
Press the light (
darken the automatic exposure level as desired.
4
Press the AUTO/MANUAL/PHOTO (
The AUTO indicator will stop blinking and will light up steadily.
This automatic exposure level will remain in effect until you change
it again by this procedure.
/
) mode.
) or dark (
) key to lighten or
/
/
) key
/
/
) key.
Advertisement
Table of Contents
