Advertisement
WELCOME
2
This User Guide provides
instructions on the setup
and usage of the Plantronics
Discovery
640 Bluetooth
®
TM
Headset.
COMPONENTS OF THE PLANTRONICS
DISCOVERY 640 BLUETOOTH
���������������
���������
�������������
���������������
������������
������
�������
�����
����
��������
�������
��������
������
�������
��������
�������
��������
��������
���������
������
��������
�
�
������������������
�����������������������������������������������������������
��������
��������������������������������������������������������
�����
��������
���������������������������������������������������
Before getting started, please
review the Safety Booklet included
in your package. For additional help,
service, or support information, refer
to your product Warranty card or
visit
www.plantronics.com.
HEADSET
®
��������
��������������
�����
������
�����
��������
����������
��������
������������
����������������
��������������������������������
CONNECTING THE COMPONENTS
The Battery Charger and Charging Adapter
connect to the Headset Carrying Pocket by
pushing the two components together. Be sure
that the indent on the attachment lines up
with the shirt clip on the Headset Carrying
Pocket.
To separate the components, grasp both the
Headset Carrying Pocket and attachment with
"SNAP"
the shirt clip facing you. Bend the outsides
back and the components will snap apart.
CAUTION:
Do not twist components.
CHARGING YOUR HEADSET
The Plantronics Discovery 640 Headset must
be charged for a minimum of 1 hour prior to
use, up to 3 hours to fully charged.
An AC Power Adapter is included. You may
also charge the Headset using the AC Power
Adapter for your cellular phone with the
appropriate Charging Adapter or using a
AAA battery.
The Headset Status Indicator glows red during
charging and turns off when fully charged.
Using the Included AC Power Adapter
1. Plug the AC Power Adapter into the base of
�����
the Headset Carrying Pocket and connect it
to your power source.
2. Insert the Headset into the Headset Carrying
����
��������
Pocket.
Using the AC Adapter from your
Cellular Phone
�������
1. Select the appropriate Charging Adapter for
your phone and connect the Charging
Adapter to the base of the Headset Carrying
��������
Pocket.
2. Plug the AC Power Adapter for your phone
into the Charging Adapter and connect the
AC Power Adapter to your power source.
3. Insert the Headset into the Headset Carrying
Pocket.
3
Advertisement
