Contents Setup and basics Assemble headset Be safe Setup PS4 Setup Xbox One Adjust the volume Mute LX1 adapter guide for LX series Overview Set up Support...
Setup and basics Assemble headset Your headset components easily snap into the headset frame to configure the best fit and sound. Follow the diagram to put your headset together. IMPORTANT When inserting the boom, align the notches on the boom jack and port. The microphone will not work if the boom is inserted incorrectly.
Setup Xbox One To setup your headset for Xbox One, go to Display and sound > Kinect and devices > Select device and adjust settings Adjust the volume (HS, HX models) To adjust the volume, slide the volume control. Mute (HS, HX models) To mute your headset, slide the mute switch to reveal the red color.
LX1 adapter guide for LX series Overview 3.5 mm Red = Mute Blue = Balanced mode Green = Independent mode EQ settings (short press) Single tone = Pure EQ maintains high frequencies Double tone = Intensify EQ emphasizes mid-range sounds Triple tone = Seismic EQ boosts bass Mode settings (press and hold for 4 seconds) Balance mode = The top dial controls master volume and the bottom dial controls game and chat...
Page 6
00:00:10 Connect a headset to the adapter in the 3.5 mm jack. Choose how you want the dials to be configured. By default, the adapter is set to Balance mode. Press the EQ button for 2 seconds to switch between Balance and Independent mode. •...