Cleaning Condenser Coil; Figure 7. Self-Closing Dispensing Valve; Figure 8. Servicing Beater Drive Shaft Seal Assembly - Cornelius 326142000 Service Manual

FIGURE 8. SERVICING BEATER DRIVE SHAFT SEAL ASSEMBLY

11. Open product shutoff valves leading from product blender tanks to freeze cylinders, fill freeze cylinders with
product, then restore Unit to operation.

CLEANING CONDENSER COIL

(see Figure 6)
NOTE: Circulating air, required to cool the refrigeration system condenser coil, is drawn in through
louvers on front and exhausted out through louvers on sides and back of Unit. Restricting air
circulation through Unit will decrease its cooling efficiency.
Periodically clean condenser coil as follows:
326142000
SPRING HOUSING
TORSION SPRING
SPRING FITTING
DISPENSING
VALVE BODY
CAGED O-RING
VALVE
LEVER
SLEEVE
SPRING
KNOB

FIGURE 7. SELF-CLOSING DISPENSING VALVE

STATIONARY
O-RING
STATIONARY
O-RING
PLASTIC SLEEVE
1
2
2 SLOTS
180_ APART
RETAINING
SCREW(2)
HOLD-DOWN
PLATE(2)
"RUNNING"
O-RINGS
STAINLESS STEEL
SEAL RETAINER
VIEW A
4 LOCKING TABS
90_ APART
4
3
VIEW B
32