Electrolux 68031 KF-N User Manual page 23

is lit
lights up
and number are displayed
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Problem
Unsuitable cookware
No cookware on the cooking
zone
Diameter of the base of the
cookware is too small for the
cooking zone
Overheating protection for the
cooking zone has been trig-
gered
Automatic switch-off has
been triggered
Electronics fault
Possible cause
What to do if ...
Remedy
Use suitable cookware
Put cookware on zone
Move to smaller cooking zone
Use suitable cookware
Switch off the cooking zone.
Switch the cooking zone on
again
Switch appliance off. Switch
appliance on again
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house's wiring system)
If after switching on again,
is displayed again, call the cus-
tomer service department
23