Overview - Cisco Nexus 9504 Hardware Installation Manual

Overview

•
Overview
This switch chassis includes the following modules:
• Supervisor modules (one or two)—one of the following types in slots SUP 1 and SUP 2 (Modules 27
• System controllers (two) (N9K-SC-A) in slots SC 1 and SC 2 (numbered from left to right on the chassis)
• Line cards (up to four) in slots LC 1 to LC 4 (numbered from top to bottom on the chassis) supported
Note
• Fabric modules in slots FM 1 to FM 6 (numbered from left to right on the chassis)
Overview, on page 1
and 28 in reports) (numbered from left to right on the chassis)
by the same type of fabric module
For compatibility information, please refer to the
Do not mix ACI-mode line cards with NX-OS mode line cards in the same
switch.
See the following table for the required fabric module types and quantities required for maximum
bandwidth.
C H A P T E R
Line Card and Fabric Module Compatibility
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
1
data sheets.
1