Settings; Highway/City Mode; Ultrabright Data Display Brightness - Cobra XRS 9445 Operating Instructions Manual

Settings

Your Detector
Settings
When changing the Settings on your detector, please keep in mind:
Buttons can have multiple functions.
I
Depending on your choice of Voice Alert or Tone Alert mode, you will
I
hear either voice messages or tones confirming changes in settings.
All settings will be stored in memory when the power is
I
turned Off and recalled when the power is turned back On.

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
Highway Mode
h
X K Ka V S
City Mode
c
X K Ka V S
To Change From Highway Mode to City Mode
Press and release
Tone Voice
the City button.
One beep
City
To Change From City Mode Back to Highway Mode
Press and release
Tone Voice
the City button again.
Two beeps Highway
English
6
Settings
Your Detector

UltraBright Data Display Brightness

•
You can choose from three settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Bright
Press and
release Dim
Dark
button
Dim
Press and release
To Change the Brightness to Dim
Press and release
City Button
the Dim button
Press and
release once.
To Change the Brightness to Dark
Press and release
the Dim button
again.
Visual Display
c
appears
To Change the Brightness to Bright
in the display
Press and release
the Dim button a
third time.
Visual Display
h
appears
in the display
Dim Button
Tone Voice Visual Display
One beep Display dims
Dim
Tone Voice Visual Display
One beep Dark Display remains
dim (no visual
alerts will be seen)
Tone Voice Visual Display
Two beeps Bright Display returns
to full brightness
Nothing Comes Close to a Cobra ® 7