Settings; Highway/City Mode; Ultrabright Data Display Brightness - Cobra SPX955 Operating Instructions Manual

Settings

Your Detector
Settings
When changing the Settings on your detector, please keep in mind:
Buttons can have multiple functions.
g
Depending on your choice of Voice Alert or Tone Alert mode, you will
g
hear either voice messages or tones confirming changes in settings.
All settings will be stored in memory when the power is
g
turned Off and recalled when the power is turned back On.

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
h
X K Ka V S
City Mode
c
X K Ka V S
To Change From Highway Mode to City Mode
Press and release
Tone
the City button.
One beep
To Change From City Mode Back to Highway Mode
Press and release
Tone
the City button again.
Two beeps
English
6
SPX955_MANL.indd 6-7
•
Press and
release
Voice
Visual Display
City
c
appears
in the display
Voice
Visual Display
h
Highway
appears
in the display
Settings
Your Detector

UltraBright Data Display Brightness

You can choose from three settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Bright
Press and
Dark release Dim
button
Dim
Dim Button
Press and release
To Change the Brightness to Dim
Press and release
Tone
the Dim button once.
One beep
To Change the Brightness to Dark
Press and release
Tone
the Dim button
One beep
again.
To Change the Brightness to Bright
Press and release
Tone
the Dim button a
Two beeps
third time.
Voice
Visual Display
Dim Display dims
Voice
Visual Display
Dark Display remains dim
(no visual alerts will
be seen)
Voice
Visual Display
Bright
Display returns
to full brightness
Nothing Comes Close to a Cobra
7
®
4/10/15 2:05 PM