FujiFilm UA13x4.5BERD-S9 Operation Manual page 38

CAP
F.f ADJUSTING GEAR
■ Adjustment without power
If power cannot be supplied from the lens connector on the camera to the lens for some unavoidable
reason, rotate the F.f adjustment gear (located inside the cover) using a finely pointed tool, for example, and
adjust.
If this adjustment is to be performed, replace the operation in step [c.] above with the operation involved
in rotating the gear used for the flange-back adjustment, and proceed by performing steps [b. - g.].
After performing the adjustments, install the cover securely.
- 4 -