FujiFilm UA13x4.5BERD-S9 Operation Manual page 34

FOR YOUR SAFETY
NOTICE
◆
Lens and its accessories are extremely precise instrument, then be sure not to apply the strong impacts to them.
If the lens is of a type in which the rear lens protrudes from the flange surface of the lens mount, be sure not to
apply impact to the lens part when installing or releasing.
◆
There may be a case that the glasses of the lens mist when the lens is carried from a cool place to a place of high
temperature and high humidity. To avoid a mist on the glasses, before moving the lens, let the lens adjust to the
ambient temperature of the place where the lens will be used.
◆
Be sure not to apply impact to the front part of the lens when operating the camera.
◆
Put the cap on the lens while the camera is not used.
◆ If an accessory to be attached to the lens is equipped with a mechanical drive relaying part, before attaching it,
check the joint part and get rid of all obstacles. If there are any unusual conditions, please contact the sales agent
from which you purchased the product.
◆ When the lens is used in the weather of fog, raining, or snowing, cover up the lens to prevent it from the water.
◆ To minimize the impact to the lens in transportation, set the zoom to the wide end and the focus to the infinity
side end before releasing the lens from the camera.