Ups Home Menu - Eaton SU700XLCD User Manual

Table 4. LCD Operating Modes (Continued)
4 4 . . 3 3 U U P P S S H H o o m m e e M M e e n n u u
The SmartOnline UPS will display the Home Menu by default. The Home Menu will display the UPS mode and
contains nine different types of UPS measurements that can be seen by navigating the menu.
Navigate the Home Menu by pressing the
Press the ESC button to return to the first measurement of the Home Menu.
Table 5. UPS Home Menu
Display Information
Displays the UPS mode , load percentage
Displays the UPS mode , load percentage
Displays the UPS mode and output load
Displays the UPS mode , input voltage
Displays the UPS mode and output
voltage and frequency.
Displays the UPS mode , battery voltage
and battery charge percentage.
UPS Display
HIGH EFFIC.MODE
IN:120V 60.0HZ
BYPASS MODE
IN:120V 60.0HZ
and W.
and VA.
power factor.
and frequency.
The UPS is operating on High Efficiency mode. The UPS is
powering and protecting the equipment
An overload or a fault has occurred, or a command has been
received, and the UPS is in Bypass mode. Equipment is powered
or buttons on the display.
LCD Display
ONLINE MODE
LOAD:100% 2700W
ONLINE MODE
LOAD:100% 3000VA
ONLINE MODE
LOAD:PF=0.99
ONLINE MODE
IN:120V 60.0HZ
ONLINE MODE
OUT:120V 60.0HZ
ONLINE MODE
BATT:50.2V 100%
Tripp Lite by Eaton SmartOnline Series User Guide 614-21326—Rev 01

UPS Home Menu

Description
but not protected by the UPS.
Bottom Row Values
The LOAD data screen specifies the
amount of power that connected
equipment is currently using in terms of
percentage and Watt.
The OUTPUT LOAD LEVEL screen
indicates the load percentage and VA
output load level.
The OUTPUT LOAD POWER FACTOR
screen indicates the power factor of
connected equipment.
The INPUT VOLTAGE & FREQUENCY
screen displays current UPS input data.
The OUTPUT VOLTAGE & FREQUENCY
screen displays current UPS output data.
The BATTERY voltage screen tracks the
charge level of your connected battery
bank in terms of voltage and charge
percentage.
13