Lcd Description - Eaton SU700XLCD User Manual

LCD Description

4 4 . . 2 2 L L C C D D D D e e s s c c r r i i p p t t i i o o n n
The LCD screen has 2 lines, each line has 16 characters. The first line shows UPS status, the second line shows measures.
After 5 minutes of inactivity, the LCD displays the screen saver, and the LCD backlight automatically dims. Press any button to
restore the screen. Note: If fault or alarm appears, the first line of LCD will cycle between fault/alarm message and UPS mode,
see troubleshooting page for additional information.
Figure 9. LCD Description
The following table describes the status information provided by the UPS
Note: If other indicator appears, see the troubleshooting for additional information.
Table 4. LCD Operating Modes
12 Tripp Lite by Eaton SmartOnline Series User Guide 614-21326—Rev 01
LCD mode description
ONLINE MODE
LOAD:100% 2700W
ESC
UPS Display
STANDBY MODE
IN:120V 60.0HZ
ONLINE MODE
LOAD:100% 3000VA
BATTERY MODE
RUNTIME:104MIN
Load/equipment status
Description
Equipment is not powered until
is Off, waiting for startup command from user.
The UPS is powering and protecting the equipment. The UPS is
operating normally.
A utility failure has occurred and the UPS is on Battery mode.
The UPS is powering the equipment with the battery power.
Prepare your equipment for shutdown.
button is pressed. The UPS