Table of Contents
Advertisement
Frequently asked questions
Cleaning the water intake filter
A filter is incorporated in the screw con-
nection of the water intake valve. The
filter must be cleaned when dirty; other-
wise, insufficient water will flow into the
wash cabinet.
The plastic housing of the water
connection contains an electrical
component.
The housing must not be dipped in
water.
Recommendation
If your water supply contains a large
number of insoluble substances, we
recommend fitting a large-area filter in
the connection between the water sup-
ply valve and the water intake hose
threaded union.
This filter can be purchased from your
Miele dealer or from Miele Service.
To clean the filter:
Disconnect the dishwasher from the
power supply.
Switch off at the electrical socket and
withdraw the plug.
Close the water supply.
Unscrew the water intake valve.
78
Take the seal ring out of the screw
connection.
Withdraw the filter using pointed pli-
ers and rinse clean under running wa-
ter.
Put the filter and seal back into place.
Make sure they are fitted correctly.
Reconnect the water intake valve to
the faucet, making sure it goes on
correctly and is not cross-threaded.
Turn on the water supply.
If water leaks out, the screw connection
may not be connected securely or it
may have been screwed on at an angle.
Unscrew and reconnect the water in-
take valve correctly.
Advertisement
Table of Contents
