Table of Contents
Advertisement
2.8
Connectors
2.8.1
Rear panel connectors
1.
PS/2 keyboard/mouse port (purple/green). This port is for a PS/2 keyboard or
mouse.
2.
USB 3.0 ports 1 and 2. These two 4-pin USB ports are available for connecting USB 3.0
devices.
3.
Serial port (COM1). This 9-pin communication port is for pointing devices. It is also
used for serial interface for data transfer.
4.
Video Graphics Adapter port. This port is for a VGA monitor or other VGA-compatible
devices.
5.
RJ-45 ports for LAN 1-2. These ports allows Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN port LED
indications.
6.
Power-on Button. Press this button to turn on the system.
7.
Location LED. The Location LED is an onboard LED that lights up when the Location
Button on the front panel is pressed. This LED helps you visually locate the server
among other servers especially when you are located at the back of the server rack.
8.
Power LED. This LED lights up when the Power-on button is pressed and the system
is on.
9.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available
for connecting USB 2.0 devices.
LAN port LED indications
Activity/Link LED
Status
Description
OFF
No link
GREEN
Linked
BLINKING Data activity GREEN
2-24
Speed LED
Status
Description
OFF
10 Mbps connection
ORANGE 100 Mbps connection
1 Gbps connection
ACT/LINK
SPEED
LED
LED
LAN port
Chapter 2: Hardware Information
Advertisement
Table of Contents
