Toro 74262TE Operator's Manual page 9

99-8939
1. Read the Operator's
Manual.
2. Height of cut
105-7797
107-1866
1. Sliding and loss of control hazard and tipping hazard,
drop-offs—do not operate the machine near drop-offs,
slopes greater than 15 degrees, or water; keep a safe
distance from drop-offs; do not turn sharply while traveling
fast, instead, slow down and turn gradually; if the roll bar is
raised, wear the seat belt; if the roll bar is lowered, do not
wear the seat belt.
3. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
107-2131
1. Hydraulic oil level
107-3069
1. Warning—there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the raised and locked position and wear the seat
belt. Lower the roll bar only when absolutely necessary; do
not wear the seat belt when the roll bar is down.
3. Read the Operator's Manual; drive slowly and carefully.
9
2. Warning—do not touch the
hot surface.