Using Your Vacuum - Bissell PET HAIR ERASER TURBO REWIND Manual

Using Your Vacuum

For additional ways to use your vacuum's features, check out support.BISSELL.com.
1.
Turn the Power Switch ON.
Optional: Turn the Brush
Roll Switch ON to run the
PowerBrush for carpet
cleaning. Brush Roll is
ON when light switch is
illuminated. Turn the Brush Roll
Switch OFF when vacuuming
hard or delicate surfaces like
hardwood, tile, small area rugs,
or frieze carpets with long
delicate fibers or threads.
WARNING
6 BISSELL.com
2.
Step gently on base and pull
the handle back to recline.
Note: The Brush Roll
automatically shuts OFF when
vacuum is locked in upright
position. Recline to reactivate.
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
3.
Use the Suction Control
Switch to change settings
between plush and low carpet
for easy multi-surface cleaning.