Remove The Microphone Rubbers - Lenovo Slim 7 Carbon Hardware Maintenance Manual

Figure 31. Remove the camera with camera cable from LCD panel
Step 2. Disconnect the camera cable from the camera board and then remove the camera board.
Figure 32. Remove the camera board
Go to https://support.lenovo.com/partslookup
replacement parts:
Camera
Camera cable
Removable tape

Remove the microphone rubbers

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 40
"Remove the hinge cover" on page 43
"Remove the bezel cover" on page 43
"Remove the LCD panel" on page 44
"Remove the camera module" on page 47
Step 1. Remove the microphone rubbers.
Note: The microphone rubbers are not reusable. Replace it when replacing related FRUs.
48
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following