Remove The Microphone Rubbers - Lenovo Legion 5i Hardware Maintenance Manual

Figure 34. Disconnect the LCD panel cable and remove the LCD panel
Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Connect your computer to the network and close the X-Rite Color Assistant program.
2. Go to https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
3. Go to C:\Program files (x86)\X-Rite Color Assistant and locate the
ProfileUpdaterForDisplayReplacement.exe file. Double-click the EXE file. Follow the on-screen
instructions to input the display serial number and click Submit. You can find the display serial
number and instructions on a sticker fixed to the front of the new LCD part. When the new
color profiles are installed successfully, a prompted window will be displayed.
Go to https://support.lenovo.com/partslookup
replacement part:
LCD panel

Remove the microphone rubbers

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the LCD module" on page 46
"Remove the LCD bezel" on page 48
"Remove the camera bracket" on page 49
"Remove the LCD panel" on page 50
Step 1. Remove the microphone rubbers.
to look up the Lenovo part numbers of the following
to download the installation
.
Chapter 4 Removing a FRU or CRU
51