Remove The Fan - Lenovo Slim 7 Carbon Hardware Maintenance Manual

Remove the fan

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the solid-state drive (SSD) " on page 32
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Disconnect the fan cable from the system board and then release the antennas and EDP cable from
the cable guides.
Figure 9. Disconnect the fan cable and then release the cables
Step 3. Remove four screws and then remove the fan.
Figure 10. Remove the fan
Screw specifications
M2.0 x L5.0
Go to https://support.lenovo.com/partslookup
part:
Fan
34
Hardware Maintenance Manual
Number of screws
4
to look up the Lenovo part number of the following replacement