Notification Call; Activating And Deactivating The Notification Call; Entering And Selecting Notification Call Number; Table 3-9 Activating And Deactivating The Notification Call - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
3.4.8

Notification Call

HiPath Xpressions Compact informs users of incoming messages via out-bound call, Short
Message Service (SMS), or pager message.
* Only DTMF based services are supported.
3.4.8.1

Activating and Deactivating the Notification Call

In order to receive a notification of messages received at your mailbox on any other desired
telephone (cell phone, home phone, etc.), the notification call function can be activated.
When the mailbox owner accesses the function, the current status is announced first (notifica-
tion call on/off). Afterwards, the notification call function can be activated / deactivated.
The notification call function can be set according to time (weekday and time). The time control
is configured by system administration via HiPath 3000 Manager.
Upon receiving a notification call, the user enters his or her code number and can listen to the
new message immediately.
With HiPath 3000 Manager, the notification call function can be set to notify users of every in-
coming message, or only messages which have been classified as urgent.
Note:
>
Before the notification call can be activated, a destination telephone number for the
notification call must be entered.
Function
Announce current status
Activate or deactivate the notification call
Table 3-9 Activating and Deactivating the Notification Call
3.4.8.2

Entering and Selecting Notification Call Number

A notification call number must be entered before the notification function can be activated. Up
to five notification call numbers can be entered in a list. The currently announced notification
call number is used. New notification call number are activated by scrolling forward.
If the notification call should be sent in the form of an SMS to a mobile phone or a pager mes-
sage, system administration must configure the function with HiPath 3000 Manager.
User Manual
XPR100us03.fm
Mailbox Use and Operation
Individual Mailbox Functions
Key
(STD)
2
0
Key
(XP)
3
1
3-11