NDE754
OPERATION: Ice Vending
When the ice dispensing glass filler lever is
pushed, an electrical circuit is made to the ice
chute door solenoid causing the ice chute door to
open. At the same time power is connected to the
agitator drive motor.
Dispensing takes place when the agitator sweeps
the ice through the ice dispensing chute: ice will
continue to discharge out this chute as long as the
ICE DISCHARGE CHUTE
agitator is turning. It stops when the agitator stops.
DOOR
SOLENOID
ICE CHUTE
DOOR
STORAGE BIN
ICE CHUTE
AGITATOR
AGITATOR
DRIVE MOTOR
VEND SWITCH
GLASS FILLER
LEVER
SINK
March 2000
Page 14