For The Electrician - Scotsman FME2400RH Service Manual

FME2400RH

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES
Electrical Connections:
DETAIL OF
Locate the nameplate for the current
JUNCTION BOX
requirements, and then determine the
wire size and type per the National
Electric Code. The machine requires a
solid chassis to earth ground wire.
Refer to the wiring diagram. The ice
machine should be connected to it's
own electrical circuit, and be
individually fused.
JUNCTION
BOX
Voltage, when the unit is under full
load, must remain within the limitations
listed on page 2.
POWER SUPPLY
LOW VOLTAGE CAN CAUSE
EQUIPMENT MALFUNCTION
AND/OR DAMAGE
All external wiring should conform to
the National, State, and local electrical
codes. Usually the services of a
licensed electrician will be required.
January 1995
Page 4