CHAPTER
2
PROGRAMMING THE INTERFACE
Introduction
This chapter describes how to program your scanner for different keyboards and
settings, and for an interface when using an Access Point (see
Interface for an Access Point,
designed as a cordless scanner. However, if you are using the VG1602g as a corded
scanner, see
Keyboard Country Layout
If your interface is USB Keyboard or Keyboard Wedge through an Access Point or a
Bluetooth Keyboard, your keyboard layout default is a US keyboard. To change this
layout, refer to the chart below for your keyboard country. Scan the appropriate
barcode below to change the layout.
By default, national character replacements are used for the following characters:
#$@[\]^'{|}~
See
ISO 2022/ISO 646 Character Replacements
replacements for each country.
Keyboard Countries
Voyager 1602g User Guide
Programming the VG1602 Corded Interface
* United States
Azeri (Cyrillic)
beginning on page 21). The VG1602g is primarily
on page 220 to view the character
Programming an
beginning on page 35.
Albania
9