Preferred Symbology Default; Output Sequence Overview; Output Sequence Editor; To Add An Output Sequence - Honeywell Voyager 1602g User Manual

Preferred Symbology Default

Scan the barcode below to set all Preferred Symbology entries to their default val-
ues.

Output Sequence Overview

Output Sequence Editor

This programming selection allows you to program the scanner to output data
(when scanning more than one symbol) in whatever order your application
requires, regardless of the order in which the barcodes are scanned. Reading the
Default Sequence symbol programs the scanner to the Universal values, shown
below. These are the defaults. Be certain you want to delete or clear all formats
before you read the Default Sequence symbol.
Note: To make Output Sequence Editor selections, you'll need to know the code I.D., code
length, and character match(es) your application requires. Use the Alphanumeric
symbols (inside back cover) to read these options. You must hold the scan button
while reading each barcode in the sequence.

To Add an Output Sequence

1. Scan the Enter Sequence symbol (see
2. Code I.D.
3. Length
4. Character Match Sequences
Voyager 1602g User Guide
On the Symbology Charts
to apply the output sequence format. Locate the Hex value for that symbology
and scan the 2 digit hex value from the Programming Chart (inside back cover).
Specify what length (up to 9999 characters) of data output will be acceptable
for this symbology. Scan the four digit data length from the Programming
Chart. (Note: 50 characters is entered as 0050. 9999 is a universal number,
indicating all lengths.) When calculating the length, you must count any
programmed prefixes, suffixes, or formatted characters as part of the length
(unless using 9999).
On the ASCII Conversion Chart (Code Page
that represents the character(s) you want to match. Use the Programming
Chart to read the alphanumeric combination that represents the ASCII
characters. (99 is the Universal number, indicating all characters.)
Preferred Symbology Default
Require Output
on page 213, find the symbology to which you want
1252), page 216, find the Hex value
Sequence, page 88).
85