Chapter 2 - Programming The Interface; Introduction; Programming The Interface - Plug And Play; Usb Ibm Surepos - Honeywell Xenon 1500 User Manual

2
Programming the Interface

Introduction

This chapter describes how to program your system for the desired interface.

Programming the Interface - Plug and Play

Note: After you scan one of the codes, power cycle the host terminal to have
the interface in effect.

USB IBM SurePos

Scan one of the following "Plug and Play" codes to program the scanner for
an IBM SurePos (USB handheld scanner) or IBM SurePos (USB tabletop
scanner) interface.
Note: After scanning one of these codes, you must power cycle the cash
register.
USB IBM SurePos
(USB Handheld Scanner)
Each bar code above also programs the following suffixes for each symbol-
ogy:
Symbology
EAN 8
EAN 13
UPC A
UPC E
Interface
Suffix
0C
16
0D
0A
Symbology
Code 39
Interleaved 2 of 5
Code 128
Code 39
USB IBM SurePos
(USB Tabletop Scanner)
Interface
Suffix
00 0A 0B
00 0D 0B
00 18 0B
00 0A 0B
2 - 1