Measurement Procedure; Preparations - Agilent Technologies N2775A User Manual

N2775A Power Supply

Measurement Procedure

Measurement Procedure

Preparations

Before turning on the power, make sure that the voltage of the power supply
CAUTION
being used matches the supply voltage indicated on the rear panel of the unit.
Turn the power switch off and connect the power cord.
1
Connect the power plug of the sensor to be used to the power receptacle
2
of the N2775A.
Turn the N2775A power switch on, and check that the front panel power
3
indicator lights.
Measurement Procedure
See the N2774A User's Guide.
10