Table of Contents
Advertisement
6.8
HYDRAULIC OIL CHECK PROCEDURE
Lube Point(s) - Hydraulic Reservoir
Reservoir Capacity - Refer to Capacities
Lube - Hydraulic Oil
Interval - Check Daily
Note: Check the hydraulic oil level with the platform in the stowed position ONLY. Be
certain the hydraulic oil has warmed to operating temperature before checking
the oil level in the reservoir.
1. On the right side of the machine on the hydraulic compartment door there is a
cutout (1) which allows viewing of the hydraulic oil tank marking (2). The reservoir
is marked with a MAX (maximum) marking (2). The MIN marking (3) is the bottom
edge of the cutout on the door. The oil level must be kept within these markings
for the hydraulic system to operate properly.
R4045
General Specifications and Operator Maintenance
Figure 18. Prop Disengaged
31221538
109
Advertisement
Table of Contents
