Recording Features; Hints For Timer Recording; Copying A Video Tape - Sanyo VWM-950 Instruction Manual

8. Recording Features

Timer Recording
•Insert a tape with its record tab into the unit.
1
1
- M E N U -
MENU
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
TIMER PROGRAMMING
SAP
PROG 12345678
DATE
START TIME
END TIME
Available program
CHANNEL
number flashes.
2 2
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
or
REC SPEED – –
Select an empty program
number.
3
3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
or
Select "ONCE", "DAILY"
(Mon-Fri), or "WEEKLY".
4 4
Select the desired month.
ONE TIME PROGRAM
PROGRAM NUMBER 1
or
DATE 1 0 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Select the desired day.
or
• You can program one
year in advance.
5
5
Select the desired start
time (hour).
ONE TIME PROGRAM
PROGRAM NUMBER 1
or
DATE 1 0 / 2 4 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Select the
minute.
or
6
6
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2 4 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
or
CHANNEL – –
REC SPEED – –
AM
B PM
Select "AM" or "PM".
7
7
Repeat the procedure in steps
5) to 6) to set the end time.
8
8
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2 4 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
or
CHANNEL 1 6
REC SPEED – –
Select the desired channel.
• If you have connected the VCR to a cable
box or satellite box as the Connection A
on page 1, select the VCR to channel 3 or
4 (the RF output channel of the VCR).
Then, select the desired channel at the
cable box or satellite box. Leave the cable
box or satellite box on for timer recording.
9
9
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2 4 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
or
CHANNEL 1 6
REC SPEED SP
BSP
SLP
Select the desired recording speed.
C.RESET
EXIT
10 10
Turn off the VCR
POWER
for recording.
Warning: Unauthorized recordings of copyrighted video tapes
• TIMER indicator on the VCR lights up.
may be an infringement of copyright laws.
(Back of Playing VCR)
Hint
Hint
• To go back one step, press [h h REW]
(during the steps 3) to 9) ).
To Check, Correct or Cancel a
Timer Program
1) Press the [POWER] to turn on
the power.
2) Press [MENU] to select the
main menu.
3) Press [PLAY B B ] or [C C STOP] to
select "TIMER PROGRAM-
MING", then press [F.FWD g g ].
4) Press [PLAY B B ] or [C C STOP] to
select the program number
which you want to check. The
details of the program you
selected will appear on the TV
screen.
• Press [F.FWD g g ] or
[h h REW] to go the digit you
want to change, then press
[PLAY B B ] or [C C STOP] to enter
correct numbers.
• You may cancel the entire pro-
gram by pressing [h h REW]
while the program number flash-
es.
5) Press [C.RESET/EXIT] to exit.
6) Press [POWER] to return to
timer stand-by mode.
- 5 -

Hints for Timer Recording

• If there is a power failure or the unit has been unplugged for more than 30 sec-
onds, the clock setting and all timer settings will be lost.
• If the tape runs out before the end time, the unit will switch to the Stop mode
immediately, eject the tape and the power will be turned off. The TIMER indicator
will flash.
• If a tape is not in the unit or does not have the record tab, the TIMER indicator
flashes and timer recording cannot be performed. Please insert a recordable tape.
• When all the Timer Recording are completed, the TIMER indicator flashes.
To play or eject the recorded tape, press [POWER] first, and then press
[PLAY B B ] or [A A EJECT].
To cancel a Timer Recording that is in progress
Press [STOP/EJECT C C / A A ] on the unit.

Copying a Video Tape

1 (Back of Recording VCR*)
Connect
AUDIO AUDIO AUDIO ANT ANT AUDIO
ANT
L L L IN IN IN
L
OUT OUT IN IN
OUT IN OUT IN
Audio/Video Cables
R R
R R
OUT OUT
OUT
(not supplied)
VIDEO VIDEO VIDEO VIDEO
OUT OUT IN IN
OUT IN OUT IN
1) Insert a pre-recorded tape into the playing VCR.
2) Insert a tape with its record tab into the recording VCR.
3) Press [SPEED] on the remote control of the recording VCR to select
the desired recording speed ("SP" or "SLP").
4) Select the "L1" or "L2" position on the recording VCR.
• To use the input jacks on the back of this unit, press [0], [0], [1] on the
remote control or [CHANNEL
• To use the input jacks on the front of this unit, press [0], [0], [2] on the
remote control or [CHANNEL
5) Press [REC/OTR] on the recording VCR.
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press [STOP/EJECT C C / A A ] on the recording VCR,
then stop playback of the tape in the playing VCR.
Hint
Hint
• For best results during dubbing, use the VCR's front panel controls whenever possible. The
remote control might affect the playing VCR's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are
not recommended.
• You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs.
• "L1" or "L2" is found before the lowest memorized channel (example: CH02).
• "L2" input jacks are on the front of this unit.
2
(Back of TV)
Connect
ANT
IN
RF Cable
OUT
(supplied)
*Front input jacks are also available
] to select "L1" position.
] to select "L2" position.
EN