Table of Contents
Advertisement
CABLE ANTENNA(CATV) CONNECTIONS
75 ohm
Cable
System
75 ohm
Cable
System
IN
IN
VCR's Back Panel
Without Cable Box
If your cable wire is connected to your TV without a converter or descrambler box, unscrew
the wire from your TV and attach it to the ANT.IN connector on the VCR. Use the supplied
round coaxial cable to connect between the VCR's VHF/UHF/CATV connector and the 75
ohm antenna input connector on the TV. With this connection, you can receive all midband,
super band, and hyperband channels.
With Cable Box
If a converter is required in your cable system, follow the instruction below:
The cable hookup permits both TV and VCR operation.
To view or record CATV channel
1
Set the TV channel to the video output channel as located on the back of the VCR (CH3
or CH4).
2
Set the VCR channel selector to the output channel of the Cable Converter box by press-
ing the CH/TRACK ( / ) or number (0-9) of your VCR. (Example: CH3)
3
Select the channel to view at the Cable Converter Box.
NOTES
• With this connection, you CANNOT record one program while viewing another.
• Channel memory programming is not needed when using the connection.
8
CABLE CONVERTER
IN
OUT
OR
AUDIO
R
ANT.IN
OUT
L
VHF/UHF
OUT
/CATV
3
4
VIDEO
CH.
Cable/
Antenna
75 ohm Coaxial Cable (Supplied)
TV set
Advertisement
Table of Contents
