Table of Contents
Advertisement
Evolve 1253
L1
CO
CO = cutout stones
1. From the stone set identify the five front grey cutout
stones and place these on the burner brackets at the
front as shown below.
3. Start placing the small-mid sized stones on the
burner, starting at the front—11 stones (identified with
a dot).
5.
Add the granules
Refer step 8 on previous page, and image below.
L2
L3
CO
CO
L1-L8 = large grey stones
L4
L5
L6
CO
CO
2. From the stone set identify the eight L1-L8 large
grey stones and place them on the burner as shown in
the above and below images.
4. Place remaining stones (identified with a dot) in the
gaps. You will need to tweak the positions of the other
stones for them to fit and sit properly.
6.
Add the wire wool
Refer note on the bottom of p.20, and image below.
Evolve 952/1253 Installation Guide: 13115-F 06-22 | 23
L7
L8
Advertisement
Table of Contents
