Removing Jammed Media - Toshiba BV420D Owner's Manual

LED
POWER ONLINE
ON OFF
 Removing jammed media
Do not use any tool that may damage the print head.
When media jamming occurs, please remove jammed media from the printer as following procedure.
Turn the power off.
1
Open the top cover and remove the media roll.
2
3 Remove the jammed media from the printer. DO NOT USE any sharp implements or tools as these
could damage the printer.
Clean the print head and platen, then remove any further dust or foreign substances.
4
Load the media again, and close the top cover.
5
28 12. Troubleshooting
ERROR
ON 12. When any abnormal operations as below are performed, a system error
occurs.
(a) Command fetch from an odd address.
(b) Access to the word data from a place other than the boundary of the word
data.
(c) Access to the long word data from a place other than the boundary of the
long word data.
(d) Access to the area of 80000000H to FFFFFFFFH in the logic space in the user
system mode.
(e) Undefined command placed in other than the delay slot has been
decoded.
(f) Undefined command in the delay slot has been decoded.
(g) Command to rewrite the delay slot has been decoded.
Printer status