Toshiba BV420D Owner's Manual page 5

Prohibited
Prohibited
Disconnect the
plug.
Disconnect the
plug.
Disconnect the
plug.
Disconnect the
plug.
Connect a
grounding wire.
No disassembling.
Prohibited
Prohibited
4 Safety Precautions
Do not insert or drop metal, flammable or other foreign objects into the
machine through the ventilation slits, as this may cause a fire or an electric
shock.
Do not scratch, damage or modify the power cable. Also, do not place heavy
objects on, pull on, or excessively bend the power cable, as this may cause a
fire or an electric shock.
If the machine is dropped or their cabinet damaged, first turn off the power
switch and disconnect the power cable plug from the outlet, and then
contact your authorized Toshiba Tec Corporation representative for
assistance.
Continued use of the machine in that condition may cause a fire or an
electric shock.
Continued use of the machine in an abnormal condition such as when the
machine is producing smoke or strange smells may cause a fire or an
electric shock.
In these cases, immediately turn off the power switch and disconnect the
power cable plug from the outlet.
Then, contact your authorized Toshiba Tec Corporation representative for
assistance.
If foreign objects (metal fragments, water, liquids) enter the machine, turn
off the power switch and disconnect the power cable plug from the outlet,
and then contact your authorized Toshiba Tec Corporation representative
for assistance.
Continued use of the machine in that condition may cause a fire or an
electric shock.
When unplugging the power cable, be sure to hold and pull on the plug.
Pulling on the cable may cut or expose the internal wires and cause a fire or
an electric shock.
Ensure that the equipment is properly grounded.
Extension cables should also be grounded.
Fire or electric shock could occur on improperly grounded equipment.
Do not remove covers, repair or modify the machine by yourself.
Contact your authorized Toshiba Tec Corporation representative for
assistance.
You may be injured by high voltage, very hot parts or sharp edges inside the
machine.
Do not use a spray cleaner containing flammable gas for cleaning this
product, as this may cause a fire.
Care must be taken not to injure yourself with the printer paper cutter.