Connection Mode - FujiFilm FF180005 Owner's Manual

CONNECTION MODE (

Adjust settings for connection to external devices.
Option Option
USB CARD READER
USB TETHER
SHOOTING AUTO
8
USB TETHER
SHOOTING FIXED
WIRELESS TETHER
SHOOTING FIXED
256
)
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
the computer. The camera functions normally when not con-
nected.
The camera can be controlled from computers, gimbals,
drones, or other devices connected via USB. The camera au-
tomatically enters "tethered shooting" (i.e., remote-control)
mode when the external device is turned on and returns to
normal operation when the external device turned off or dis-
connected.
•
Photographs can be taken remotely and automatically
downloaded to computers running Capture One, Adobe®
Photoshop® Lightroom® + Tether Plugin, FUJIFILM X Acquire,
or FUJIFILM Pixel Shift Combiner. FUJIFILM X Acquire can also
be used to save and load camera settings.
•
The camera can be used as a webcam when connected to
a computer running FUJIFILM X Webcam.
•
Remote photography and movie recording are available
when the camera is connected to a compatible device
such as a gimbal or drone. Use camera controls to switch
between still photography and movie recording. The fea-
tures available vary with the device connected.
As for USB TETHER SHOOTING AUTO, except that the
camera remains in "tethered shooting" (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption. At default settings, pictures are not recorded to
the memory card.
Choose this option for wireless remote photography. Select a
network using D CONNECTION SETTING > NETWORK
SETTING.
Description Description