Charging via Computer
The batteries also charge if the camera is connected to a computer. Turn the
camera off , insert the batteries, and connect a USB cable.
Battery status is shown by indicator lamp 2.
Indicator lamp 2
Indicator lamp 2
Blinks
•
O
Connect the camera directly to the computer; do not use a USB hub
or keyboard.
•
Charging stops if the computer enters sleep mode. To resume
charging, activate the computer and disconnect and reconnect the
USB cable.
•
Charging may not be supported depending on the model of com-
puter, computer settings, and the computer's current state.
•
The battery takes about 400 minutes to charge with a charging input
of 5 V/500 mA.
N
•
If the camera is turned on during charging,
charging will end and the USB connection
will instead be used to power the camera.
The battery level will begin to gradually
decline.
•
The camera will display a "power supply" icon when powered via USB.
USB connector (Type-C)
On
Off
Charging the Batteries
Battery status
Battery status
Battery charging
Charging complete
Charging error
2
43