Chapter 2. Installation
Chapter 2. Installation
2.1 Introduction
This chapter explains the installation of the benchtop and wall-mount versions of the Optica, the various sensors used
with the system, and the I/O and power wiring.
2.2 Benchtop Installation
2.2.1 Mounting the Benchtop
The Optica benchtop dimensions are shown in Figure 5 below. Two feet on the bottom of the case can be unfolded to
raise up the front for easier viewing, if desired.
Figure 5: Optica Benchtop Dimensions
Optica™ Operator's Manual
9