Chapter 2. Installation; Introduction - GE PanaFlow HT User Manual

Chapter 2. Installation

2.1 Introduction

To ensure safe and reliable operation of the PanaFlow HT, the system must be installed in accordance with the
established guidelines. Those guidelines, explained in detail in this chapter, include the following topics:
•
Unpacking the PanaFlow HT system
•
Selecting suitable sites for the electronics enclosure and the meter body
•
Installing the meter body
•
Installing the electronics enclosure (remote mount option)
•
Wiring the electronics enclosure
WARNING! The PanaFlow HT flow transmitter can measure the flow rate of many fluids, some potentially
hazardous. The importance of proper safety practices cannot be overemphasized.
Be sure to follow all applicable local safety codes and regulations for installing electrical
equipment and working with hazardous fluids or flow conditions. Consult company safety
personnel or local safety authorities to verify the safety of any procedure or practice.
To meet CE Mark requirements, all cables must be installed as described in
PanaFlow HT User's Manual
!ATTENTION EUROPEAN CUSTOMERS!
Appendix G, CE Mark Compliance.
Chapter 2. Installation
5