Ansi Installation Steps - GE Multilin EPM 6000 Instruction Manual

3.1.2

ANSI Installation Steps

3–2
FIGURE 3–2: ANSI and DIN Mounting Panel Cutouts
Mount the meter in a dry location free from dirt and corrosive substances. The meter is
designed to withstand harsh environmental conditions (see the Environmental
specifications in Chapter 2 for additional details).
Use the following steps to install the meter:
Insert the four threaded rods by hand into the back of the meter.
Twist until secure.
Slide the ANSI 12 mounting gasket onto the back of the meter with
the rods in place.
Slide the meter with the mounting gasket into the panel.
Secure from the back of the panel with a lock washer and nut on
each threaded rod.
Use a small wrench to tighten – do not overtighten.
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 3: INSTALLATION